Architecture and strategies Management Unit and SE Manager
U41855-J-Z125-3-76 47
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k02
2.6 Management Unit and SE Manager
The Management Unit together with the SE Manager enables central monitoring,
administration and operation of all units of the SE server and the systems running on it.
Additional cross-unit functions are also available, e.g. for displaying the components of the
SE server, together with the operating status or performance monitoring.
2.6.1 Role and user strategy
Depending on how the system is viewed, different tasks must be performed to administer
and operate the SE server which are categorized in multiple task areas. The task areas
correspond to the roles described below.
● Administrator
● BS2000 administrator
● XenVM administrator
● AU administrator
● Operator
● Service
The roles are tied to an account. In other words the user takes over a role when he/she logs
in on the SE Manager with an account which is assigned to this role. A user who takes over
a task area (i.e. a role) must be authorized to execute all the functions which are required
to perform these tasks.
When the system is delivered, there are predefined accounts for the Administrator and
Service roles, see “Predefined accounts” on page 50.
All roles except the Service role can be assigned to additional accounts, see “Further
accounts with role assignment” on page 50.
The task areas of the various roles are described in detail below. For further information,
see the online help.
To Next Page
Loading...
