Management Unit and SE Manager Architecture and strategies
48 U41855-J-Z125-3-76
Administrator
This task area comprises management of all units on the SE server and management and
operation of the systems which run on Server Units and Application Units of the SE server.
– BS2000 systems:
For BS2000 on a Server Unit, the task area comprises operation of the BS2000 system
or, under VM2000, operation and partial management of the BS2000 guest systems.
– XenVM systems:
For a Server Unit x86 with a XenVM license the task area also comprises management
of the virtual machines (XenVMs) and their devices for Linux and Windows guest
systems.
– Application Units:
For the optional Application Units the task area comprises the configuration and
management of the Application Units and the systems running on these.
In the SE server configuration, the administrator performs, among others, the following
tasks:
– Managing all user accounts
– Managing individual authorizations
– LDAP configuration
– Managing the networks
– Monitoring audit and event logging
– The administrator can configure the automatic messaging (via SNMP trap or E-Mail)
that is triggered for events with a certain weighting.
– Additional general configurations like installing add-on packs, etc.
The administrator can also open a Linux shell on the Management Unit and can use this to
call CLI commands. The cli_info command lists the M2000-specific commands which
are available. You can obtain a detailed description of the commands in the online help.
All administrator accounts are of equal value.
To Next Page
Loading...
