Fujitsu SE700

Introduction Summary of contents
U41855-J-Z125-3-76 15
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.46 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k01
1.3 Summary of contents
Chapter 2 contains fundamental information which is relevant for all readers (e.g.
architecture, fundamental operating functions).
Chapter 3 contains fundamental information on the SE Manager, the central user interface
of the SE server.
The subsequent chapters describe the tasks on the SE server and the user interface of the
SE Manager. They are based on the tree structure of the SE Manager.
Detailed information on the data displayed, the dialog boxes, and operation of the SE
Manager is provided in the online help of the SE Manager.
README file
For information on any functional changes or extensions to this manual, please refer to the
product-specific Readme file.
In addition to the product manuals, Readme files for each product are available to you
online at http://manuals.ts.fujitsu.com. You will also find the Readme files on the Softbook
DVD.
Information under BS2000
When a Readme file exists for a product version, you will find the following file on the
BS2000 system:
SYSRME.<product>.<version>.<lang>
This file contains brief information on the Readme file in English or German (<lang>=E/D).
You can view this information on screen using the
/SHOW-FILE command or an editor.
The
/SHOW-INSTALLATION-PATH INSTALLATION-UNIT=<product> command shows the user
ID under which the product‘s files are stored.
Additional product information
Current information, version and hardware dependencies and instructions for installing and
using a product version are contained in the associated Release Notice. These Release
Notices are available online at http://manuals.ts.fujitsu.com.