Working in XenVM operation Systems on Server Units
130 U41855-J-Z125-3-76
5.6 Working in XenVM mode (on Server Unit x86)
You manage the XenVMs of a Server Unit x86 using the menu item Virtual machines →
XenVM.
5.6.1 VM administration
The VM administration tab displays an overview of the existing XenVMs and enables you to
create or delete XenVMs.
Ê Select Systems → [<se server>(SE<model>) →] <unit> (SU<x86>) → Virtual machines →
XenVM, VM administration tab.
The VM administration tab provides information on the XenVMs which have already
been configured.
Create new XenVM
When a XenVM is created, not only the main memory and CPUs are configured, but also
virtual devices. From the viewpoint of the guest system (Linux/Windows), these devices
look like real devices. To enable the guest system to recognize and use the devices
configured on the XenVM, the corresponding device drivers must be installed in the guest
system.
Requirements
● This action is not possible if the maximum number of 64 VMs (BS2000 and XenVM) has
been reached.
To Next Page
Loading...
