Operating a Native system Systems on Application Units
148 U41855-J-Z125-3-76
The Operation tab opens (example for a Linux Red Hat System).
Operation
Ê In the Operation tab click Open in the Operation group.
– In this way you open the web interface of the iRMC for an AU PY (e.g. AU25 or
AU47) .
– In this way you open the web interface of the Management Board for an AU PQ (e.g.
AU87/DBU87).
Booting or shutting down the system
The possible actions depend on the particular status of the system: If the system is running,
the Operation tab in the Actions group displays the text Shutdown. If the system is not running,
the text Boot is displayed.
Ê In the Actions group click Execute to shut down or boot the system.
To Next Page
Loading...
