Managing hardware Managing units of the SE server
U41855-J-Z125-3-76 213
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Management,
SNMP tab:
The SNMP tab displays information on the configuration of the local system data, allowed
read accesses, and trap receivers.
The following functions are available in the SNMP tab:
Changing local system data for SNMP
Ê In the Configuration of local system data group click the Change icon, and in the
subsequent dialog box make changes to the system file.
i The SE Manager displays the SYSLOCATION in the header.
In a Management Cluster, SYSLOCATION should be the same as the Location
of the Unit's SE server.
Adding or removing allowed read accesses
Ê In the Allowed read accesses group select one of the following procedures:
Ê To add a new read right, click Add new read access, and after making the necessary
entries confirm the action.
Ê To remove a read access, click the Remove icon by the required read access and
confirm the action.
To Next Page
Loading...
