Managing hardware Managing units of the SE server
U41855-J-Z125-3-76 221
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
Upload configuration data backup to an MU
Ê Click Upload configuration data backup (CSR), select a backup file, and confirm the action.
i Ensure to only upload the configuration data backups of the associated unit!
Downloading/deleting configuration data backup for the MU
Ê To download the file archive, click the Download icon in the row with the required file
archive, select whether you wish to open or save the file archive, and confirm the action.
i Do not change the file names of CSR backups after you have downloaded
them, otherwise they will not be accepted when they are uploaded.
Deleting configuration data backup for the MU
Ê To delete the file archive, click the Delete icon in the row with the required file archive
and confirm the action.
Restoring configuration data from a file archive
Ê Click the Restore icon in the row with the required file archive and confirm the action.
If the Customer Support staff has already prepared restoration, the action is rejected
with a message to this effect.
v Restoration leads to the unit being rebooted immediately.
i Important information
– For MU-specific data:
The current MU-specific data are replaced by the old data.
– For MU-global data:
The current MU-global data are not changed, only old, no longer existing MU-
global data are restored.
The MU-global data are the configured authorizations (accounts, LDAP
configuration, IP based access rights), the configuration of the alarm
management, the configured Application Units, the configured applications, the
configuration of the FC networks, the configured SU Clusters.
To Next Page
Loading...
