Fujitsu ServerView Event Manager - DPT Traps (Dptscsi.mib)

ServerView Event Manager 101
Trap overview
5.3.5 DPT traps (dptscsi.mib)
MIB-OID: 1.3.6.1.4.1.1597
This section lists DPT traps in alphabetical order.
Trap name ID Meaning Error class
dptArrayCfgChangeTrap 12 Configuration of a RAID
array changed due to one of
the following events:
– creating a new array
– deleting an existing
array
– modifying an array
(changing stripe size,
etc.)
informational
dptDevBlock
ReassignedTrap
6 The HBA reassigned a
block.
dptScsiDevBadBlockNumber
contains the reassigned
block number.
informational
dptDevData
InconsistentTrap
7 The RAID verify function
found a data inconsistency.
dptScsiDevBadBlockNumber
and
dptScsiDevBadBlockCount
contains the starting block
number and the number of
blocks affected,
respectively.
informational
dptDevError
ThresholdHitTrap
8 The status of the particular
device changed and the
error count crossed the
device crash threshold.
informational
dptDevLocking
StatusChangedTrap
10 Locking of drive
started/stopped.
informational
dptDevReqSenseTrap 11 Request sense information
received from the HBA.
informational
Table 22: DPT traps