Fujitsu ServerView Event Manager - Filtering Alarms

54 ServerView Event Manager
Filter rules
4.2.2 Filtering alarms
In the Filter Rules – Alarm Filtering dialog box you can activate or deactivate filter
settings for an alarm type.
Figure 11: Filter settings for an alarm type
You can activate or deactivate the following filter settings:
All unknown alarms
Filter out unknown alarms. These are alarms which are not defined in
any of the integrated MIBs.
Alarms from unknown server
Filter out alarms from unknown servers.
Alarms of severity major
Filter according to the severity level major.
Alarms of severity minor
Filter according to severity level minor.
Alarms of severity informational
Filter according to the severity level informational.