ServerView Event Manager 55
Filter rules
In the input field Set time for repetition in seconds you can specify the interval after
which the same alarm is allowed through from the same server again. This is
useful to prevent the management station from being bombarded with identical
alarms from a server that is not running correctly.
When you specify, for example, an interval of 30 seconds, filter interval of each
severity are as follows:
Severity of
alarm
Value of
severity
Expression from which
filter interval is requested
Filter interval
Critical 1 30 seconds × 1 30 seconds
Major 2 30 seconds × 2 60 seconds
Minor 3 30 seconds × 3 90 seconds
Informational 4 30 seconds × 4 120 seconds
Table 5: Filter interval of each severity
To Next Page
Loading...