Fujitsu ServerView Event Manager - Page 124

124 ServerView Event Manager
Trap overview
diskFailureTrap 1 A disk drive has failed. The
location of the disk is
indicated by the disk name.
Replace the disk device.
The numbers in the name
indicate Port, Target, Lun
behind the controller pair.
Examples:
– DISK10100 is disk
location Port 1, Target
01, Lun 00.
– DISK30300 is disk
location Port 3, Target
03, Lun 00.
major
diskInformationTrap 2 A disk drive has recovered.
The location of the disk is
indicated by the disk name.
The numbers in the name
indicate Port, Target, Lun
behind the controller pair.
Examples:
– DISK10100 is disk
location Port 1, Target
01, Lun 00.
– DISK30300 is disk
location Port 3, Target
03, Lun 00.
informational
externalInputFailureTrap 20 The user-defined External
Input to the EMU indicates
a failure. If the state of the is
FA IL UR E , then one of the
user-defined external input
devices is reporting a
problem.
major
externalInput
InformationTrap
21 The user-defined External
Input to the EMU indicates
a recovery.
informational
Trap name ID Meaning Error class
Table 37: PXRE traps