ServerView Event Manager 59
Mail forwarding in general
Mail Settings tab
The Mail Settings tab provides fields for the mail settings, some of which
already contain predefined settings.
The input fields in the Mail Settings window have the following meanings:
Name Meaning
Description Name of the mail settings
If you want to change the mail settings for an existing
mail forwarding (see Edit button, section "Forwarding
alarms" on page 49), this field contains the already
assigned name and is disabled.
Subject Subject of the mail
The mail subject can contain macros (see section
"Macros" on page 76).
If the subject contains characters which cannot be
displayed, they are replaced by displayable ones (e.g.
hex code).
Mail To E-mail address of the person to whom you want to send
the alarm. Multiple addresses must be separated with a
semicolon or comma.
Cc E-mail address of the person to whom you want to send
a copy of the alarm (optional). Multiple addresses must
be separated with a semicolon or comma. Setting two or
more addresses is only possible if the EventManager is
running in a Windows environment.
Time Model Time model indicating when an alarm is to be
forwarded.
Select a predefined time model from the drop-down list.
You can set your own time model via the Time Model
Settings tab.
Additional
Message
Text field for defining the alarm message.
Information about the servers can be inserted via
different macros (see section "Macros" on page 76).
A suggestion is offered here to simplify handling. Delete
or change it if necessary.
Table 6: Input fields in the Mail Settings window
To Next Page
Loading...