How to fix sensor error on Fujitsu Scanner?
To resolve a sensor error on your Fujitsu Scanner, clean the ultrasonic sensors referring to the relative section of the manual. If the issue persists, turn the scanner off and then back on.
How to fix optical error (ADF Front) on Fujitsu SP-1130N Scanner?
To fix an optical error (ADF Front) on your Fujitsu Scanner, clean the glass referring to the relative section of the manual. If the issue continues, turn the scanner off and then back on.
How to fix optical error (ADF Back) on Fujitsu SP-1130N?
To fix an optical error (ADF Back) on your Fujitsu Scanner, clean the glass referring to the relative section of the manual. If the problem persists, turn the scanner off and then back on.
What to do if Fujitsu SP-1130N says 'No Document Has Been Loaded'?
If your Fujitsu Scanner displays 'No Document Has Been Loaded', ensure you load a document in the ADF paper chute (feeder).
How to fix a paper jam in Fujitsu SP-1130N Scanner?
If a paper jam occurs in your Fujitsu Scanner, try the following: remove jammed documents referring to the relative section of the manual; load documents of the specified paper size in the ADF paper chute (feeder); change the scan settings so the scanning area fits the document.
What to do if Fujitsu SP-1130N shows 'Being Used by Others'?
If your Fujitsu Scanner displays a 'Being Used by Others' message, ensure that another application isn't using the scanner, verify the scanner's connection method is correct, and confirm that no operations are being performed on the scanner's operator panel.
What to do if Fujitsu Scanner says 'Cover Open'?
If your Fujitsu Scanner indicates 'Cover Open', remove the document from the ADF and ensure the ADF is properly closed.
What to do if Fujitsu SP-1130N scanning has been stopped by the user?
If scanning on your Fujitsu Scanner has been stopped by the user, and documents remain in the ADF, open the ADF and remove the documents before resuming a scan.
Details crucial safety precautions for using the scanner to prevent injury or damage.
Lists the necessary hardware and software specifications for the computer.
Step-by-step guide for setting up the scanner using a wired LAN connection.
Instructions for establishing a connection between the scanner and computer using a USB cable.
Explains the procedure for powering the scanner on and off correctly.
Guides the user through the process of scanning using a connected application.
Lists document types that should not be fed into the scanner to prevent damage or errors.
Detailed steps for replacing the brake and pick rollers.
Guides on how to safely remove jammed documents from the ADF.
Explains error indications and general troubleshooting steps for scanner errors.
Steps to resolve issues where the scanning process fails to initiate.
Troubleshooting steps for network connectivity problems between scanner and computer.
Troubleshooting steps for USB connection failures.
General| Scanning Technology | CIS (Contact Image Sensor) |
|---|---|
| Optical Resolution | 600 dpi |
| Maximum Document Size | A4 |
| Interface | USB 3.2 Gen1x1, Ethernet |
| ADF Capacity | 50 sheets |
| Duplex Scanning | Yes |
| Color Depth | 24-bit |
| Weight | 2.7 kg |
| Scanning Speed (Duplex) | 60 ipm |
| Supported OS | Windows, macOS, Linux |
| Dimensions | 298 x 135 x 133 mm |
| Scanning Method | ADF (Automatic Document Feeder) |
| Dimensions (W x D x H) | 298 mm x 135 mm x 133 mm |
| Scan Speed (A4, 300 dpi) | Simplex: 30 ppm (Color), 30 ppm (Monochrome) |
To Next Page