How to fix sensor error on Fujitsu SP-1125N?
To resolve a sensor error on your Fujitsu Scanner, clean the ultrasonic sensors referring to the relative section of the manual. If the issue persists, turn the scanner off and then back on.
How to fix optical error (ADF Front) on Fujitsu Scanner?
To fix an optical error (ADF Front) on your Fujitsu Scanner, clean the glass referring to the relative section of the manual. If the issue continues, turn the scanner off and then back on.
How to fix optical error (ADF Back) on Fujitsu SP-1125N Scanner?
To fix an optical error (ADF Back) on your Fujitsu Scanner, clean the glass referring to the relative section of the manual. If the problem persists, turn the scanner off and then back on.
What to do if Fujitsu Scanner says 'No Document Has Been Loaded'?
If your Fujitsu Scanner displays 'No Document Has Been Loaded', ensure you load a document in the ADF paper chute (feeder).
How to fix a paper jam in Fujitsu Scanner?
If a paper jam occurs in your Fujitsu Scanner, try the following: remove jammed documents referring to the relative section of the manual; load documents of the specified paper size in the ADF paper chute (feeder); change the scan settings so the scanning area fits the document.
What to do if Fujitsu Scanner shows 'Being Used by Others'?
If your Fujitsu Scanner displays a 'Being Used by Others' message, ensure that another application isn't using the scanner, verify the scanner's connection method is correct, and confirm that no operations are being performed on the scanner's operator panel.
What to do if Fujitsu SP-1125N says 'Cover Open'?
If your Fujitsu Scanner indicates 'Cover Open', remove the document from the ADF and ensure the ADF is properly closed.
What to do if Fujitsu Scanner scanning has been stopped by the user?
If scanning on your Fujitsu Scanner has been stopped by the user, and documents remain in the ADF, open the ADF and remove the documents before resuming a scan.
Details about the scanner models, their features, and specifications.
Step-by-step guides for connecting via Wired LAN (Auto IP, Manual IP) and USB.
Outlines the process of scanning using bundled image scanning applications.
Detailed instructions for replacing the brake and pick rollers.
Procedures for clearing paper jams and handling ADF errors like cover open.
Solutions for problems with powering on, and connecting via USB or network.
Troubleshooting for scanning not starting, slow scans, and poor image results.
Addresses issues with document feeding errors and image artifacts like streaks or shadows.
Steps to take and information to gather before contacting customer support.
Procedures for setting, changing, clearing, and resetting the panel's password.
Provides web links and information for obtaining technical support and purchasing consumables.
General| Color scanning | Yes |
|---|---|
| Maximum scan size | 210 x 297 mm |
| Output color depth | 24 bit |
| Output grayscale depth | 8 bit |
| Output monochrome depth | 1 bit |
| ADF scan speed (b/w, A4) | 25 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Scanner type | ADF scanner |
| Product color | Gray |
| Built-in display | No |
| Sensor type | CMOS dual CIS |
| Scan drivers | ISIS, TWAIN |
| Scan file formats | |
| Daily duty cycle (max) | - pages |
| Maximum ISO A-series paper size | A4 |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Input voltage | 100 - 240 V |
| Power supply type | AC |
| Power consumption (off) | 0.3 W |
| Power consumption (sleep) | 2 W |
| Power consumption (typical) | 18 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 135 mm |
|---|---|
| Width | 298 mm |
| Height | 133 mm |
| Weight | 2500 g |
To Next Page