Fujitsu SP-1125N User Manual

Sensor Error
If a sensor error occurs, the indicators on the operator panel lights up as follows.
Check Indicator Power Indicator
Flashes once On
Take the following measures.
● Clean the ultrasonic sensors by referring to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 72).
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in Before You Contact the
Scanner Service Provider (page 117) and then contact the distributor/dealer where you purchased this product.
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
Optical error (ADF Front)
If an optical error occurs in the front of the ADF, the indicators on the operator panel light up as follows.
Check Indicator Power Indicator
Flashes 2 times On
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 72) and clean the glass.
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in Before You Contact the
Scanner Service Provider (page 117) and then contact the distributor/dealer where you purchased this product.
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
Optical error (ADF Back)
If an optical error occurs in the back of the ADF, the indicators on the operator panel light up as follows.
Check Indicator Power Indicator
Flashes 3 times On
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 72) and clean the glass.
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in Before You Contact the
Scanner Service Provider (page 117) and then contact the distributor/dealer where you purchased this product.
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
Troubleshooting
93

Fujitsu SP-1125N Specifications

General

Color scanning	Yes
Maximum scan size	210 x 297 mm
Output color depth	24 bit
Output grayscale depth	8 bit
Output monochrome depth	1 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Scanner type	ADF scanner
Product color	Gray
Built-in display	No
Sensor type	CMOS dual CIS
Scan drivers	ISIS, TWAIN
Scan file formats	PDF
Daily duty cycle (max)	- pages
Maximum ISO A-series paper size	A4
USB version	3.2 Gen 1 (3.1 Gen 1)
Input voltage	100 - 240 V
Power supply type	AC
Power consumption (off)	0.3 W
Power consumption (sleep)	2 W
Power consumption (typical)	18 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	135 mm
Width	298 mm
Height	133 mm
Weight	2500 g