EasyManuals Logo

Fujitsu SP-1125N User Manual

Fujitsu SP-1125N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Paper Jams/Pick Errors Occur Frequently
Check the following points
Do the documents meet the paper requirements? (page 112)
Is there any foreign matter in the ADF? (page 112)
Is there a document remaining in the ADF? (page 112)
Is the roller set (the brake roller and pick roller) installed correctly? (page 112)
Is the roller set (the brake roller and pick roller) clean? (page 112)
Is the roller set (the brake roller and pick roller) worn out? (page 113)
If the problem still persists, check each item in Before You Contact the Scanner Service Provider (page
117) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to Documents for Scanning (page 52).
Is there any foreign matter in the ADF?
Solution
Clean the ADF.
Remove any foreign matter from the ADF.
For details, refer to Daily Care (page 66).
Is there a document remaining in the ADF?
Solution
Remove the document from the ADF.
For details, refer to When a Paper Jam Occurs (page 87).
Is the roller set (the brake roller and pick roller) installed correctly?
Solution
Install the roller set (the brake roller and pick roller) correctly.
For details, refer to Replacing the Roller Set (page 79).
Is the roller set (the brake roller and pick roller) clean?
Solution
Clean the roller set (the brake roller and pick roller).
Troubleshooting
112

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SP-1125N and is the answer not in the manual?

Fujitsu SP-1125N Specifications

General IconGeneral
Color scanningYes
Maximum scan size210 x 297 mm
Output color depth24 bit
Output grayscale depth8 bit
Output monochrome depth1 bit
ADF scan speed (b/w, A4)25 ppm
Optical scanning resolution600 x 600 DPI
Scanner typeADF scanner
Product colorGray
Built-in displayNo
Sensor typeCMOS dual CIS
Scan driversISIS, TWAIN
Scan file formatsPDF
Daily duty cycle (max)- pages
Maximum ISO A-series paper sizeA4
USB version3.2 Gen 1 (3.1 Gen 1)
Input voltage100 - 240 V
Power supply typeAC
Power consumption (off)0.3 W
Power consumption (sleep)2 W
Power consumption (typical)18 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth135 mm
Width298 mm
Height133 mm
Weight2500 g

Related product manuals