Fujitsu SP-1125N User Manual

Errors
● Error Indication
If an error occurs while the scanner is used, the indicators on the operator panel light up as follows.
● For temporary errors
The check indicator turns on or turns off.
The power indicator stays on.
● For device errors
The check indicator flashes.
The power indicator stays on.
Temporary errors can be recovered by the operator, whereas device errors may require troubleshooting by a
service engineer.
HINT
Error Recovery Guide is started up and the icon is displayed in the notification area located at the far right of
the task bar when you logged onto Windows.
When an error occurs on the scanner, the error name and code number is displayed in the Error Recovery
Guide window.
Take note of the displayed information and click the [More Info] button to check the troubleshooting
procedure.
Troubleshooting
89

Fujitsu SP-1125N Specifications

General

Color scanning	Yes
Maximum scan size	210 x 297 mm
Output color depth	24 bit
Output grayscale depth	8 bit
Output monochrome depth	1 bit
ADF scan speed (b/w, A4)	25 ppm
Optical scanning resolution	600 x 600 DPI
Scanner type	ADF scanner
Product color	Gray
Built-in display	No
Sensor type	CMOS dual CIS
Scan drivers	ISIS, TWAIN
Scan file formats	PDF
Daily duty cycle (max)	- pages
Maximum ISO A-series paper size	A4
USB version	3.2 Gen 1 (3.1 Gen 1)
Input voltage	100 - 240 V
Power supply type	AC
Power consumption (off)	0.3 W
Power consumption (sleep)	2 W
Power consumption (typical)	18 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	135 mm
Width	298 mm
Height	133 mm
Weight	2500 g