EasyManuals Logo

Fujitsu SP-1125N User Manual

Fujitsu SP-1125N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
The Scanned Image of a Picture or Photo is Rough/Image Noise Appears
Check the following points
Did you configure the settings in the scanner driver to scan in black & white mode? (page 105)
Are the glass and rollers inside the ADF clean? (page 105)
If the problem still persists, check each item in Before You Contact the Scanner Service Provider (page
117) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Did you configure the settings in the scanner driver to scan in black & white mode?
Solution
Use a scanner driver to configure the scan settings that do not "binarize" (output in black and white), and
then perform a scan.
The scanned image may differ from the original image significantly if you simply "binarize" (output in
black & white) a picture or a photo.
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to Daily Care (page 66).
Troubleshooting
105

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SP-1125N and is the answer not in the manual?

Fujitsu SP-1125N Specifications

General IconGeneral
Color scanningYes
Maximum scan size210 x 297 mm
Output color depth24 bit
Output grayscale depth8 bit
Output monochrome depth1 bit
ADF scan speed (b/w, A4)25 ppm
Optical scanning resolution600 x 600 DPI
Scanner typeADF scanner
Product colorGray
Built-in displayNo
Sensor typeCMOS dual CIS
Scan driversISIS, TWAIN
Scan file formatsPDF
Daily duty cycle (max)- pages
Maximum ISO A-series paper sizeA4
USB version3.2 Gen 1 (3.1 Gen 1)
Input voltage100 - 240 V
Power supply typeAC
Power consumption (off)0.3 W
Power consumption (sleep)2 W
Power consumption (typical)18 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth135 mm
Width298 mm
Height133 mm
Weight2500 g

Related product manuals