Fujitsu SP-1130N User Manual

7 Select [Wired LAN] and connect the scanner to the computer as follows.
a Connect the computer to a network device via a wired LAN or Wi-Fi ( ).
For details about how to connect the computer to the network, refer to the computer manual.
b Connect the scanner to the network device via a wired LAN ( ).
c Connect the power cable to the scanner and the AC outlet ( , ).
d Turn on the scanner.
For details, refer to How to Turn the Power ON (page 31).
8 Click the [Select a Scanner] button in the [How to Connect the Scanner] window.
The [Scanner Selection Tool] window appears.
9 Click the [Set an IP Address] button.
A message appears, prompting you to connect the scanner to the computer via the USB cable.
Scanner Setup
26

Fujitsu SP-1130N Specifications

General

Scanning Technology	CIS (Contact Image Sensor)
Optical Resolution	600 dpi
Maximum Document Size	A4
Interface	USB 3.2 Gen1x1, Ethernet
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Weight	2.7 kg
Scanning Speed (Duplex)	60 ipm
Supported OS	Windows, macOS, Linux
Dimensions	298 x 135 x 133 mm
Scanning Method	ADF (Automatic Document Feeder)
Dimensions (W x D x H)	298 mm x 135 mm x 133 mm
Scan Speed (A4, 300 dpi)	Simplex: 30 ppm (Color), 30 ppm (Monochrome)