Fujitsu SP-1130N User Manual

2 Place the documents at the center of the ADF paper chute (feeder), and adjust the side guides to the
widest document in the batch.
ATTENTION
Load all documents above the center of the pick roller. If documents are loaded outside of the pick roller
width, they may be fed skewed or not fed into the ADF.
3 Adjust the stacker to fit the longest document.
For details, refer to Setting Up the Stacker (page 36).
Various Ways to Scan
63

Fujitsu SP-1130N Specifications

General

Brand	Fujitsu
Model	SP-1130N
Category	Scanner
Language	English