c Press the scan/stop button on the operator panel for 2 seconds or more.
The feed/eject rollers rotate at the same time.
Be careful not to touch the rollers with your hand while they are
rotating.
d Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the surface
of the feed/eject roller, and wipe horizontally to clean dirt and dust off the whole surface.
Make sure that it is wiped properly because black residue on the roller will affect the feeding
performance.
4 Close the ADF.
For details, refer to How to Close the ADF (page 35).
Be careful not to get your fingers caught when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
Daily Care
76
To Next Page
Loading...
Need help?
General