Appendix
4. Follow th e on -screen instructions to restore the image.
• Select the language.
• At the Windows Set up dialog window, enter your OS, language and other
preferences and click Next to continue.
• Click Install now to proceed with reinstalling Windows.
• At License terms, check o n I accept the license terms and click Next.
•AtWhich type of installatio n do you want, click on Custom: Install Windows only (advanced).
• Delete all partitions on the drive and click Next. Installation of Windows will start. This will
take some time so please wait until the installation is finished and the system restarts.
5. When the system restarts, perform all set-up steps to arrive at the Desktop.
6. Connect to the Internet.
7. Use the Backup of the contents of the C:\Drivers folder to inst all needed drivers and
applications to your system. If it is not available, download the softw are from the
Fujitsu Support Site, as described below in the "Auto Installation support for the
software d ownloaded from support website" section below.
Installation of essential access software
1. Insert the bootable disc in your DVD drive.
2. Op en the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a D rivers
folder in the bootable disc, the computer does not need the essential a ccess software.
The recovery image already has the essential access software installed.
3. You can now connect to the internet and download FSDM (Fujitsu Software Dow nload
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloa ded yet.
Auto Installation support for the software downloaded from support website
1. Download FSDM (F ujitsu Software Download Manager) from the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded ye t.
2. When the software packages are downloaded from the web, it is important to
download the Auto Installer Software package a nd the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder and
Readme file in the s ame location as the other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Account Control dialog box. This will take some time to
process the software packages. A m essage w ill be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software downloaded f rom the supp ort site.
8. It is recommended that you install all the software in the listed order. You can
Select Al l, to install the softw are in th e order l isted.
9. Click the Install button to s tar t the in stallatio n.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
Fujitsu 103
To Next Page
Loading...
Need help?
General