Accessories for your Tablet PC (opti
onal)
Connecting the Tablet PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is operating.
Unplug the mains adapter from the Tablet PC before you connect
the Tablet PC to the cradle.
If the tablet PC is connected to the cradle, you must connect the mains adapter
to the cradle in order to be able to use all of the cradle’s functions.
cradle
► Remove the power plug of the mains adapter from the mains socket.
► Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC.
2
4
1
3
► Position the Tablet PC so that it lies on the surface of the tray on the cradle.
► Push the tablet PC onto the cradle in the direction of the arrow (1) until you feel it engage
in the connector and until the release button has returned to its original position.
► Plug the DC output connector on the mains adapter into the DC input
connector (DC IN) on the cradle (2).
► Connect the power cable to the mains adapter (3).
► Plug the power cable into the mains socket (4).
Fujitsu 41
To Next Page
Loading...
Need help?
General