Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupSystem configurationHardwareconfiguration
To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard.
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the Tablet PC.
When it is delivered, the Tablet PC is set to factory default settings. You can
change these settings in BIOS Set up U tility. Any changes you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BI OS Setu p U tility program contains the following menus:
About
Displays information relating to the BIOS, processor and Tablet PC
System
Advanced system settings
Advanced
Configuration of various hardware components, such as mouse, keyboard,
processor
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIO S Setup Utility
Starting the BIOS Setup Utility
► Press and hold the volume down button and switch the tablet PC on.
BIOSSetupUtility
► If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setu p Utility starts.
64 Fujitsu
To Next Page
Loading...
Need help?
General