Security functions
Setting up the fingerprint sensor
(configuration dependent)
Fingerprintsens orFingerprintsensor
Whether your device has a fingerprint sensor or not depends on the
device configuration that you ordered.
The fingerprint sensor ca
n record an image of a fingerprint. With additional fingerprint
software, this image can
be processed and used instead of a password.
1
► You must install the fingerprint software in order to be able to use the fingerprint sensor (1).
The current Workplace Protect software for the fingerprint sensor can be found on the
Internet at
"
http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html."
Using the security lock (cradle only)
SecurityLockAnti-theftprotectionSecurityLock
Your cradle (optional) is equipped with a security device for a Kensington lock cable. You
can use the Kensington lock cable, a sturdy steel cable, to protect the cradle against
theft. The Kensington lock cable is available as an accessory.
► Fit the Kensington lock cable to the
device on your cradle.
Fujitsu 51
To Next Page
Loading...
Need help?
General