Fujitsu T5010 - LifeBook Tablet PC User Manual (English)

Other manuals for Fujitsu T5010 - LifeBook Tablet PC

User Guide414 pages

Guía Del Usuario205 pages

Mode D'Emploi208 pages

Restoration Manual2 pages

Getting Started12 pages

Questions and Answers:

J
james64Aug 17, 2025
Why does my Fujitsu T5010 - LifeBook PC turn off by itself?
- S
  Scott YoderAug 17, 2025
  If your LifeBook Tablet PC turns off by itself, it might be due to power management settings that are too short for your needs. Try pressing any button on the keyboard or moving the mouse. If that doesn't work, push the Power/Suspend/Resume button. Another cause could be operating on battery power and ignoring a low battery alarm, leading to Dead Battery Suspend mode. In this case, install a power adapter and push the Power/Suspend/Resume button. Also, verify the condition of the battery using the Status Indicator panel; if the battery is shorted, replace or remove it.
A
Alexander HernandezAug 20, 2025
What to do if Fujitsu Tablet PC fails to recognize DVD/CD-RW/CD-ROM’s?
- A
  Amy MartinezAug 21, 2025
  If your Fujitsu Tablet PC fails to recognize DVD/CD-RW/CD-ROM’s, first ensure that the disc is correctly placed on the raised center circle of the drive. If that doesn’t work, make sure the optical drive tray is latched shut; if not, push on the front of the tray until it latches, or remove and re-insert the drive. Verify that you have the correct DVD Player software installed and that the drive designator used by the application is the same as the one used by the operating system. Finally, check if the DVD/CD-RW/CD-ROM is dirty or defective; wipe it with a non-abrasive CD cleaning cloth and reinsert, or try another disc.
S
Samuel HardyAug 25, 2025
Why won't my Fujitsu T5010 - LifeBook PC Tablet load the operating system?
- D
  Daniel McbrideAug 25, 2025
  If the system powers up but fails to load the operating system on your Fujitsu Tablet PC, the boot sequence settings may not be compatible with your configuration. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen, or use the [F2] key to enter the setup utility and adjust the source settings from the Boot menu. If you have a secured system, ensure you have the correct password. Enter the setup utility and verify the Security settings. If the internal hard drive was not detected, use the BIOS setup utility or Primary Master submenu to try to auto detect the internal hard drive.
M
michaelbrownAug 28, 2025
What to do if my Fujitsu T5010 - LifeBook PC PC does not turn on when installed in the optional Port Replicator?
- S
  Samuel DeckerAug 28, 2025
  If your Fujitsu Tablet PC does not turn on when installed in the optional Port Replicator, ensure the Port Replicator AC adapter is plugged in to provide power. Also, make sure the Tablet PC is properly seated in the Port Replicator; remove and re-dock your LifeBook Tablet PC to ensure it is correctly connected.
A
Ashley CrossSep 1, 2025
What to do if my Fujitsu LifeBook Tablet PC doesn't turn on?
- J
  Jeffrey EllisSep 1, 2025
  If you turn on your Fujitsu LifeBook Tablet PC and nothing seems to happen, check the Status Indicator Panel to determine the presence and condition of the battery. Install a charged battery or a Power adapter if the installed battery is completely discharged or there is no Power adapter installed. If the battery is faulty, remove it and operate from another power source or replace it. If the battery is low, use a Power adapter to operate until the battery is charged, or install a charged battery. Ensure the power adapter is connected correctly and has power from the AC outlet, airplane jack, or car cigarette lighter. If the power adapter is faulty, try a different one.
M
maydylanSep 5, 2025
Why can't I access my external floppy disk on my Fujitsu Tablet?
- M
  Michelle MonroeSep 5, 2025
  If you cannot access your optional external floppy disk on your Fujitsu Tablet, first, ensure that you are not trying to write to a write-protected floppy disk; eject the disk and set it to write enable. If the disk is not loaded correctly, eject it, check its orientation, and re-insert it. The floppy disk drive may not be properly installed; remove and re-install it. Also, check if security settings are protecting access to floppy disk data; verify your password and security settings.
J
jonathan85Sep 9, 2025
Why does my external monitor not display any information on my Fujitsu T5010 - LifeBook PC?
- S
  Steve BrownSep 9, 2025
  If you have connected an external monitor to your Fujitsu Tablet and it does not display any information, ensure that your BIOS setup is set to enable your external monitor. You can toggle the video destination by pressing [Fn]+ [F10] together, or check your BIOS setup. If the external monitor is not properly installed, reinstall the device. Also, verify that your operating system is set up with the correct software driver for that device, consulting your device and operating system documentation to activate the proper driver.