Fujitsu UTB-YDB - Temperature Range Settings; Temperature Display Settings

En-10
Temperature Range Settings (This changes the temperature range.)
To set the temperature range
Press the Set Time buttons to
set the temperature range.
Check that it is
.
Temperature range setting
2
Press the ENTER button.
Check that
and flash for two
seconds.
3
Press the DAY button to move to “
Temperature Display Settings.”
1
Decrement Increment
● The temperature range set for heating operation is different.
DAY
Temperature Display Settings (This switches the display between Celsius and Fahrenheit.)
To switch the temperature display
Press the Set Time buttons to
set the temperature display.
Check that it is
.
Temperature display setting
2
Press the ENTER button.
Check that
and flash for two
seconds.
3
Press the DAY button twice to move
to “
Setting the Group remote con-
troller address.”
Celsius Fahrenheit
1
Decrement Increment
DAY
Moving to “ Indoor Unit Registration”
To move to indoor unit registration
Pressing once moves to indoor unit
registration
Pressing seven times moves to indoor
unit registration
Press the Set Temperature button
once or press the Set Tem-
perature button
seven times to move to indoor unit registra-
tion.
: 10 °C – 30 °C (48 °F – 88 °F)
: 16 °C – 30 °C (60 °F – 88 °F)