Fujitsu UTY-RNRGZ5 - On Timer; Off Timer; Auto Off Timer

3-4-1 On Timer
(1) Touch the [On Timer] on the
“Timer Setting” screen. When
the“PasswordVerication”
screen is displayed, enter the
password and touch [OK].
Back
On Time
r[
Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
Enable the On Timer
(2) “On Timer” screen is displayed. Touch the [Enable/Dis-
able] on the “On Timer” screen.
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Disable]
Operation Start Time [In 0.5 hr]
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “On
Timer” screen.
SettheOperationStartTime
(4) Touch the [Operation Start time] on the “On Timer”
screen. “Operation Start time” screen is displayed.
(5) Set the time by touching [
] or [ ].
(4) (5)
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Start Time [In 0.5 hr]
Fri 10:00AM
Operation Start Time
Cancel OK
In
hr
0.5
When the [OK] is touched, the display returns to the “On
Timer” screen.
NOTE
Up to 24 hours can be set.
Applythesetting
(6) Touch the [OK] on the “On
Timer” screen. After the setting
change screen is displayed,
the display returns to the “Timer
Setting” screen.
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Start Time [In 0.5 hr]
3-4-2 O󰀨Timer
(1) Touchthe[O󰀨Timer]onthe
“Timer Setting” screen. When
the“PasswordVerication”
screen is displayed, enter the
password and touch [OK].
Back
On Time
r[
Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
EnabletheO󰀨Timer
(2) “O󰀨Timer”screenisdisplayed.Touchthe[Enable/Dis-
able].
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Disable]
Operation Stop Time [In 0.5 hr]
Enable/Disable
Cancel OK
Enable
Disable
Whenthe[OK]istouched,thedisplayreturnstothe“O󰀨
Timer” screen.
SettheOperationStopTime
(4) Touchthe[OperationStoptime]onthe“O󰀨Timer”
screen. “Operation Stop Time” screen is displayed.
(5) Set the time by touching [
] or [ ].
(4) (5)
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
Fri 10:00AM
Operation Stop Time
Cancel OK
In
hr
0.5
When[OK]istouched,thedisplayreturnstothe“O󰀨
Timer” screen.
NOTE
Up to 24 hours can be set.
Applythesetting
(6) Touchthe[OK]onthe“O󰀨
Timer” screen. After the set-
ting change screen is dis-
played, the display returns to
the “Timer Setting” screen.
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
3-4-3 AutoO󰀨Timer
(1) Touchthe[AutoO󰀨Timer]on
the “Timer Setting” screen.
Whenthe“PasswordVerica-
tion” screen is displayed, enter
the password and touch [OK].
Back
On Time
r[
Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
EnabletheAutoO󰀨Timer
(2) “AutoO󰀨Timer”screenisdisplayed.Touchthe[Enable/
Disable]onthe“AutoO󰀨Timer”screen.
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
Enable /Disable [Disable]
[In 30 min.]
[ – ]
Operation Stop Time
Time Range Setting
Auto Off Timer
Fri 10:00AM
Cancel OK
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “Auto
O󰀨Timer”screen.
SettheOperationStopTime
(4) Touchthe[OperationStoptime]onthe“AutoO󰀨Timer”
screen.
(5) The “Operation Stop” time screen is displayed. Set the
time with [
] or [ ]. The time can be set within the 30
to 240 min. range in 10 min. increments.
En-10