Fujitsu UTY-RNRGZ5 - Anti Freeze (for Administrator); Human Sensor Setting (for Administrator)

When the [OK] is touched, the display returns to the
“Setting” screen. If the [Back] on the “Setting” screen is
touched, the display returns to the “Temp. Range Set-
ting” screen.
NOTE
The settable upper limit value and lower limit value may
bedi󰀨erentdependingontheindoorunitmodel,settingat
installation and the place of use.
Applythesetting
(7) Touch the [OK] on the “Set
Temp. Range Setting” screen.
After the setting change
screen is displayed, the
display returns to the “Special
Setting” screen.
–
–
–
18.0°c
18.0°c
26.0°c
30.0°c
24.0°c
30.0°c
–
Enable /Disable [Enable]
Set Temp. Range Setting
Cance
lO
K
Lower LimitUpper Limit
Auto
Heat
Cool/Dry
3-6-4 Anti Freeze (for administrator)
(1) Touch the [Anti Freeze] on
the “Special Setting” screen.
Whenthe“PasswordVerica-
tion” screen is displayed, enter
the password and touch the
[OK].
Back
Special Setting
Set Temp.
Range Setting
Set Temp.
Auto Return
Anti Freeze
Economy
Next
Page
Page 1/ 2
On/O󰀨oftheAntiFreeze
(2) “Anti Freeze” screen is dis-
played.Selectthe[On]or[O󰀨]
on the “Anti Freeze” screen.
Anti Freeze
Cancel OK
On
Off
When the [OK] is touched, data transmission is per-
formed and after the setting change screen is displayed,
the display returns to the “Special Setting” screen.
3-6-5 HumanSensorSetting(foradministrator)
(1) Touch the [Human Sensor Setting] on the “Special Set-
ting”screen.Whenthe“PasswordVerication”screenis
displayed, enter the password and touch the [OK].
(2) “Human Sensor Setting” screen is displayed. Touch the
[AutoSaving]or[AutoO󰀨]onthe“HumanSensorSet-
ting” screen.
(1) (2)
Back
Previous
Page
Page 2/ 2 Special Setting
Human Sensor
Setting
Fan Control for
Energy Saving
Auto Saving [Disable]
[Disable]Auto Off
Human Sensor Setting
Back
Each setting screen is displayed.
SettingoftheAutoSaving
(3) Touch the [Auto Saving] on the “Human Sensor Setting”
screen. “Auto Saving” screen is displayed. Touch the
[Enable/Disable] on the “Auto Saving” screen.
(4) “Enable/Disable” screen is displayed. Touch the [Enable]
on the “Enable/Disable” screen.
(3) (4)
Auto Saving
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 30 min.]
Fri 10:00AM
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to “Auto
Saving” screen.
(5) Touch the [Absence Detection Time] on the “Auto Sav-
ing” screen.
(6) The “Absence Detection Time” screen is displayed. Set
the time with [
] or [ ]. The time can be set to 15, 30,
45, 60, 90, 120, or 180 min.
(5) (6)
Auto Saving
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 30 min.]
Fri 10:00AM
Absence Detection Time
Cancel OK
In
min.
30
Fri 10:00AM
NOTE
When detection time the same as or longer than “Auto
O󰀨”issetat“AutoSaving”,“AutoSaving”doesnot
operate.
When the [OK] is touched, the display returns to the “Auto
Saving” screen. And when the [OK] on the “Auto Sav-
ing” screen is touched, the display returns to the “Human
Sensor Setting” screen.
SettingoftheAutoO󰀨
(7) Touchthe[AutoO󰀨]onthe“HumanSensorSetting”
screen.“AutoO󰀨”screenisdisplayed.Touchthe[En-
able/Disable]onthe“AutoO󰀨”screen.
(8) “Enable/Disable” screen is displayed. Touch the [Enable]
on the “Enable/Disable” screen.
(7) (8)
Auto Off
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Fri 10:00AM
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to “Auto
O󰀨”screen.
(9) Touchthe[AbsenceDetectionTime]onthe“AutoO󰀨”
screen.
(10) The “Absence Detection Time” screen is displayed. Set the
time with [
] or [ ]. The time can be set from 1 to 24 hr.
(9) (10)
Auto Off
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Fri 10:00AM
Absence Detection Time
Cancel OK
In
hr
24
Fri 10:00AM
NOTE
When detection time the same as or shorter than
“AutoSaving”issetat“AutoO󰀨”,“AutoSaving”does
not operate.
When the [OK] is touched, the display returns to the “Auto
O󰀨”screen.Andwhenthe[OK]onthe“AutoO󰀨”screen
is touched, the display returns to the “Human Sensor
Setting” screen.
En-15