Fujitsu UTY-RNRGZ5 - CONTROLLER OPERATION AND MONITORING; Monitor Mode Screen

1 MONITOR
1-1 Monitor
1-1-1 Monitor mode screen
Monitor mode screen is the home screen of this unit.
26.0
26.0
°C
°C
Cool
Auto
Office
Set Temp.
26.0°C
26.0°C
Mode
MenuStatus
Fan
Fri 10:00AM
Room Temp.
(i)
(c)
(e)
(f)
(d)(a) (i)
(i) (g)(h)
(b)
(a) R.C.groupname:
Name of the remote controller group to which this unit is
connected.Referto[3Setting]→[3-9InitialSetting]→
[3-9-4 R.C.Group Name Setting].
(b) Clock:
Referto[3SETTING]→[3-9InitialSetting]→[3-9-2
Date Setting].
(c) Mode:
When this is touched, the display switches to the “Mode”
screen.Referto[2CONTROL]→[2-2OperationSet-
tings]→[2-2-1SettheOperationMode].
(d) Settemp.:
When this is touched, the display switches to the tem-
peraturesettingscreen.Referto[2CONTROL]→[2-2
OperationSettings]→[2-2-2SettheTemperature].
When the operation mode is set
to [Custom Auto], the set tem-
perature is displayed for cooling
and heating.
Set Temp.
28.0°C
28.0°C
20.0°C
20.0°C
Cool
Heat
(e) Fan:
When this is touched, the display switches to the fan
speedsettingscreen.Referto[2CONTROL]→[2-2
OperationSettings]→[2-2-3SettheFanSpeed].
(f) Roomtemp.:
The ambient temperature sensed by this unit is dis-
played.Referto[3SETTING]→[3-9InitialSetting]→
[3-9-7 Display Item Setting].
(g) Menu:
When this is touched, the display switches to the “Menu”
screen. Refer to [3 SETTING].
(h) Status:
When this is touched, the display switches to the “Status”
screen. Refer to [1-1-2 Status display].
(i) Statusicons:
Anerroroccurred.Referto[1-1-2Statusdisplay]→
< Error Information screen >.
Operation from this unit is prohibited by the Central
Controller. Refer to [1-1-2 Status display].
Mode mismatch. The mode which cannot operate
simultaneously is selected. Refer to [1-1-2 Status
display].
TheOnTimer,O󰀨Timer,orAutoO󰀨Timerisset.
Referto[3SETTING]→[3-4TimerSetting].
Theweeklytimerisset.Referto[3SETTING]→
[3-5 Weekly Timer Setting].
The set temperature automatic return setting is set.
Referto[3SETTING]→[3-6SpecialSetting]→
[3-6-2 Set Temp. Auto Return].
Itshowsthatitistimetocleanthelter.Referto[3
SETTING]→[3-10Maintenance]→[3-10-3Filter
Sign Reset].
The temperature sensor of this unit is used. Refer
to[3SETTING]→[3-9InitialSetting]→[3-9-5R.C.
Sensor Setting].
For the screen display, this product uses a Bitmap font made
and developed by Ricoh Company, Ltd.
During the Lead lag operation, the monitor mode display dif-
fers as below.
Referto[3Setting]→[3-9InitialSetting]→[3-9-8LeadLag
Setting] for details of the Lead lag operation.
(a) R.C.groupname:
“Lead Lag” is shown.
(c) Mode:
You cannot change the operation mode during the Lead
lag operation. The screen does not move even if you
touch here.
(g) Menu:
When touching, the display switches to the “Lead Lag
Setting” screen.
(h) Status:
It does not appear.
(i) Statusicons:
lights if an error has occurred.
blinks during the Lag operation.
1-1-2 Statusdisplay
The remote controller and indoor unit setting status are dis-
played.
Touch the [Status] on monitor
mode screen. “Status” screen is
displayed.
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
The “Status” screen has 2, 3 or 4 pages which are switched
by touching the [Next Page] or [Previous Page]. When the
[Monitor] is touched, the display returns to the monitor mode
screen.
(*:Itemsthatindoorunitdoesnotsupportarenotdisplayed.)
< Page 1 >
Air Flow Direction
VT
On On
Comfor
tC
omfort
On
HZ
Comfort Economy
Individual Individual
Anti Freeze
Monitor
Next
Page
Error
Information
Status Page 1/ 4
• AirFlowDirection*:
Theairowdirectionsettingisdisplayed.Thesettingwill
appearonlyforindoorunitswhichcansetairowdirec-
tions.Duringcomfortableairowsetting,[Comfort]is
displayed.
“Individual” is displayed only when this remote control-
ler is connected to the indoor unit which supports the
appropriate function. When setting is performed, [
✓
] is
displayed. Referto[3Setting]→[3-3AirFlowDirection
Setting]→[3-3-3IndividualHold].
• Comfort*:
ON or OFF of the comfort setting is displayed.
En-5