Fujitsu UTY-RNRGZ5 - Temp. Unit Setting; R.C.group Name Setting; Sensor Setting; Password Setting

(11) Touch the [Time Format] on the “Display Format Set-
ting” screen.
(10) (11)
Month/Dat/Year
Year/Month/Day
Date Format
Cancel OK
Day/Month/Year
Fri 10:00AM
Display Format Setting
Cancel OK
Fri 10:00AM
Date Format
Time Format
Day/Month/Year
12:00–11:59AM/PM
(12) “Time Format” screen is
displayed. Select the desired
format.
When the [OK] is touched, the
display returns to the “Display
Format Setting” screen.
00:00–11:59 AM/PM
00:00–23:59
Time Format
Cancel OK
12:00–11:59 AM/PM
Fri 10:00AM
(13) When the [OK] on the “Display Format Setting” screen
is touched, after a setting change screen is displayed,
the display returns to the “Date setting” screen.
QuittheDatesetting
(14) When the [Back] on the “Date
Setting” screen is touched, the
display returns to the “Initial
Setting” screen.
Date Setting
Date and Time Setting
Display Format Setting
Back
3-9-3 Temp.UnitSetting
(1) Touch the [Temp. Unit Setting] on the “Initial Setting”
screen.
(2) “Temp. Unit Setting” screen is displayed. Select the [°C]
or [°F]. (Factory setting is “°C”.)
(1) (2)
Back
Next
Page
Page 1/ 3 Initial Setting
Language Setting Date Setting
R.C.Group
Name Setting
Temp. Unit
Setting
°C
°C
°F
°F
Temp. Unit Setting
Cancel OK
When the [OK] is touched, after a setting change screen is
displayed, the display returns to the “Initial Setting” screen.
3-9-4 R.C.GroupNameSetting
(1) Touch the [R.C.Group Name
Setting] on the “Initial Setting”
screen.
“R.C.Group Name Setting”
screen is displayed.
Back
Next
Page
Page 1/ 3 Initial Setting
Language Setting Date Setting
R.C.Group
Name Setting
Temp. Unit
Setting
Descriptionofthescreen
R.C.Group Name Setting
Cancel OK
Fixed
Phrase
UVW
XY
Z./
_–
ABC
DE
ABCDEFGHIJKLM
│O
ver
FGH
IJ
KLM
NO
0–9
SP BS
PQR
ST
(a)
(b)
(c)
(d)
(e)
(f)
(a) Inputarea:
When inputting more than 12 characters, “Over” is
shown at the right end.
(b) Characterkeys:
Touch the same key until the character to be used is dis-
played.
(c) FixedPhrasekey:
[Floor,Corridor,O󰀩ce,ConfRoom,ReceiptRoom,Room,
Room No., Front, Side, Entrance, Outlet, East, West,
South, North, Window] is registered. Touch the [Fixed
Phase] key until the sentence to be used is displayed.
(d) Space key
(e) Backspace key
(f) Cursor keys
ChangetheR.C.GroupName
(2) Touch each key and enter the name. When the [OK] is
touched, after a setting change screen is displayed, the
display returns to the “Initial Setting” screen.
3-9-5 R.C. Sensor Setting
(1) Set the [R.C. Sensor Setting] on the “Initial Setting”
screen.
(2) “R.C. Sensor Setting” screen is displayed. Touch the
[Used].
(1) (2)
Back
Previous
Page
Page 2/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Display Item
Setting
Master Indoor
Unit Setting
Next
Page
R.C. Sensor Setting
Cancel OK
Used
Not Used
When the [OK] is touched, after the data is transmitted
to the indoor unit, the display returns to the “Initial Set-
ting” screen.
3-9-6 PasswordSetting
(1) Touch the [Password Setting]
on the “Initial Setting” screen.
Back
Previous
Page
Page 2/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Display Item
Setting
Master Indoor
Unit Setting
Next
Page
ChangethePassword
(2) “Password Setting” screen is displayed. Touch the
[Change Password].
(3) “PasswordVerication”screenisdisplayed.Enterthe
current password, and touch the [OK].
(2) (3)
Password Setting
Change Password
Change Setting
Back
0
CL
5
1
6
2
7
3
8
4
9
Cancel OK
Password Verification
Enter Current Password
NOTE
The default password is “0000” (4 digits).
En-19