Fujitsu UTY-RNRGZ5 - Language Setting; Date Setting

• RCSensorSetting*:
This setting uses the sensor of this unit to sense the
room temperature. The room temperature can be
sensed at a position, closer to the person than the
indoor unit sensor. Factory settings is “Not Used”.
• MasterIndoorUnitSetting:♦
• PasswordSetting:
The password setting and changes can be performed.
In addition, password request to the following setting
items can be set.
• On Timer (3-4-1)
• O󰀨Timer(3-4-2)
• AutoO󰀨Timer(3-4-3)
• Weekly Timer (3-5)
• Set Temp. Auto Return (3-6-2)
• Set Temp. Range Setting (3-6-3)
• Anti Freeze* (3-6-4)
• Human Sensor Setting* (3-6-5)
• Fan Control for Energy Saving* (3-6-6)
• Initial Setting (3-9)
• Maintenance (3-10)
• DisplayItemSetting:
Display of the Filter sign and Room temp. can be
switched between Visible and Invisible.
• RCMaster/SlaveSetting♦
• I.U.DisplayNumberSetting*♦
• LeadLagSetting:
When connecting multiple indoor units in 1 R.C.Group,
they take turns stopping 1 or 2 at a time for backup.
Factory setting is “disabled”.
When the item to be set is touched, the display switches
to each setting screen. When each setting is complete
or canceled, the display returns to this screen. When
[Back] is touched, the display returns to the “Main Menu”
screen.
3-9-1 LanguageSetting
(1) Touch the [Language Setting]
on the “Initial Setting” screen.
“Language Setting” screen is
displayed.
Back
Next
Page
Page 1/ 3 Initial Setting
Language Setting Date Setting
R.C.Group
Name Setting
Temp. Unit
Setting
(2) This screen has 2 pages which are switched by touching
the [Next Page] or [Previous Page]. Touch the language
to be used.
Deutsch
Español
Français
Język
polski
Language Setting Page 1/ 2
Cancel OK
Next
Page
English
Русский
Language Setting Page 2/ 2
Cancel OK
Previous
Page
Português
Türkçe
Italiano Ελληνικά
Dutch
(3) When the [OK] is touched, after a setting change screen
is displayed, the display returns to the “Initial Setting”
screen.
3-9-2 DateSetting
(1) Touch the [Date Setting] on
the “Initial Setting” screen.
“Date Setting” screen is dis-
played.
Back
Next
Page
Page 1/ 3 Initial Setting
Language Setting Date Setting
R.C.Group
Name Setting
Temp. Unit
Setting
SettheDateandTime
(2) Touch the [Date and Time Setting] on the “Date Setting”
screen. “Date and Time Setting” screen is displayed.
(3) Touch the [Date] on the “Date and Time Setting” screen.
“Date” screen is displayed.
(2) (3)
Date Setting
Date and Time Setting
Display Format Setting
Back
Date and Time Setting
Date
01/ 01/2017
Time
12:00 AM
Sun 12:00AM
Cancel OK
Date Format Day/Month/Year
Time Format 12:00-11:59AM/PM
Summer Time Setting Disable
(4) Set the date by touching [ ]
or [ ].
When the [OK] is touched, the
display returns to the “Date
and Time Setting” screen.
2017
0101
Sun 12:00AM
Date
Cancel OK
YearMonthDay
NOTE
Setting screen format corresponds to the preference
of the “Display format Setting”.
(5) Touch the [Time] on the “Date and Time Setting” screen.
(6) “Time” screen is displayed. Set the Time with [ ] or [ ].
(5) (6)
Date and Time Setting
Date
01/ 01/2017
Time
12:00 AM
Sun 12:00AM
Cancel OK
Date Format Day/Month/Year
Time Format 12:00-11:59AM/PM
Summer Time Setting Disable
12 00
Sun 12:00AM
Time
Cancel OK
hour
AM
min.
When the [OK] is touched, the display returns to the
“Date and Time Setting” screen.
NOTE
Setting screen format corresponds to the preference
of the “Display format Setting”.
(7) When the [OK] on the “Date and Time Setting” screen is
touched, after a setting change screen is displayed, the
display returns to the “Date Setting” screen.
SettheDisplayFormatoftheDateandTime
(8) Touch the [Display Format Setting] on the “Date Setting”
screen.
(9) “Display Format Setting” screen is displayed. Touch the
[Date Format].
(8) (9)
Date Setting
Date and Time Setting
Display Format Setting
Back
Display Format Setting
Cancel OK
Fri 10:00AM
Date Format
Time Format
Day/Month/Year
12:00–11:59AM/PM
(10) “Date Format” screen is displayed. Select the desired
format.
When the [OK] is touched, after a setting change screen
is displayed, the display returns to the “Display Format
Setting” screen.
En-18