Fujitsu UTY-RNRGZ5 - Special Operation Modes

A bar is displayed above the
day of the week with a sched-
ule set.
1
2
3
4
Back
Next
Page
Timer
Clear
Copy
Schedule 1 Setting
Fri 10:00AM
Wed ThuFri SatTueMonSun
08:00
AM On Dry 28.0°c
10:00
AM –– Cool 26.0°c
12:00
PM –– –– 24.0°c
03:00
PM O ff –– –– °c
Whenperformingadi󰀨erentsettingforotherdaysofthe
week, repeat (3) to (11).
Copythesettingofeachdayoftheweek
(12) The contents of setting per-
formed at a certain day of the
week can be copied to other
days of the week. Touch the
day of the week to be copied
and touch the [Copy].
1
2
3
4
Back
Next
Page
Timer
Clear
Copy
Schedule 1 Setting
Fri 10:00AM
Sun
08:00
AM On Dry
Mon Wed ThuFri SatTue
28.0°c
10:00
AM –– Cool 26.0°c
12:00
PM –– –– 24.0°c
03:00
PM O ff –– –– °c
Next, touch the day of the
week to be pasted. When the
[Paste] is touched, a dotted
bar is displayed over the day
of the week to be pasted. Con-
tinue to paste to other days of
the week.
1
2
3
––
:
–– –– ––
–– . – °c
–– : –– –– –– –– . – °c
–– : –– –– –– –– . – °c
Cancel
:Copied :Pasted
Paste OK
Schedule 1 Setting
Fri 10:00AM
Sun Mon Wed ThuFri SatTue
To cancel the paste, touch
the selected day of week and
touch the [Paste Clear].
When the [OK] is touched,
avericationscreenisdis-
played.
1
2
3
Cancel
:Copied :Pasted
OK
Schedule 1 Setting
Fri 10:00AM
Sun
08:00
AM On Dry
Mon Wed ThuFri SatTue
28.0°c
10:00
AM –– Cool 26.0°c
12:00
AM –– –– 24.0°c
Paste
Clear
Whenthe[Yes]ontheveri-
cation screen is touched, the
setting is pasted.
Schedule 1 Setting
No Yes
Pastes the copied timer data to the selected data of
week. OK?
Clearadayoftheweeksetting
To clear the setting contents of
each day of the week, select
the objective day of the week
and touch the [Timer Clear].
1
2
3
4
Back
Next
Page
Copy
Schedule 1 Setting
Fri 10:00AM
Sun
08:00
AM On Dry
Mon Wed ThuFri SatTue
28.0°c
10:00
AM –– Cool 26.0°c
12:00
PM –– –– 24.0°c
03:00
PM O ff –– –– °c
Timer
Clear
Avericationscreenisdis-
played. When the [Yes] is
touched, the setting is cleared.
Schedule 1 Setting
The timer of the selected day of week will be
cleared. OK?
No Yes
Endtheschedulesetting
When the [Back] is touched,
the display returns to the
screen of (2).
When the [Back] on the screen
of (2) is touched, the display
returns to the screen of (1).
1
2
3
4
Back
Next
Page
Copy
Schedule 1 Setting
Fri 10:00AM
Sun
08:00
AM On Dry
Mon Wed ThuFri SatTue
28.0°c
10:00
AM –– Cool 26.0°c
12:00
PM –– –– 24.0°c
03:00
PM O ff –– –– °c
Timer
Clear
3-5-3 DayO󰀨Setting
SetthedayoftheweekofwhichWeeklyTimeristobe
temporarilydisabled.Whenthesetdayhaspassed,the
setting is cleared.
(1) Touchthe[DayO󰀨Setting]onthe“WeeklyTimerSet-
ting” screen.
(2) “DayO󰀨Setting”screenisdisplayed.Whenthedayof
the week of which Weekly Timer is not to be performed
is touched, a check mark is displayed.
(1) (2)
Back
Enable Schedule [Schedule 1]
[Set]
[None]
Schedule Setting
Day Off Setting
Weekly Timer Setting
:Day Off
Day Off Setting
Cancel OK
Sun Mon Wed ThuFri SatTue
When setting is complete, touch the [OK]. After the set-
ting complete screen is displayed, the display returns to
the “Weekly Timer Setting” screen.
3-6 SpecialSetting
(1) Touch the [Special Setting] on
the “Main Menu” screen.
Monitor
Previous
Page
Page 2/ 3 Main Menu
Summer Time
Setting
Initial SettingPreference
Special Setting
Next
Page
(2) “Special Setting” screen is displayed. When the screen
has multiple pages, they can be switched by touching
the [Next Page] or [Previous Page].
Back
Special Setting
Set Temp.
Range Setting
Set Temp.
Auto Return
Anti Freeze
Economy
Next
Page
Page 1/ 2
Back
Previous
Page
Page 2/ 2 Special Setting
Human Sensor
Setting
Fan Control for
Energy Saving
Thefollowingcontentsareset:
(*:Itemsthatindoorunitdoesnotsupportarenotdis-
played.)
• Economy:
Thetemperaturesettingiso󰀨setautomaticallyovera
certain period of time. The power consumption is sup-
pressed by setting the temperature high during cooling
and low during heating.
• SetTemp.AutoReturn(foradministrator):
Even if the temperature setting is changed during Cool
or Heat mode operation, after the set time, the tem-
perature automatically returns to the set temperature.
• SetTemp.RangeSetting(foradministrator):
Power consumption by excessive temperature setting is
suppressed by restricting the temperature setting range
for each operation mode of Auto, Cool/Dry, or Heat.
• AntiFreeze*(foradministrator):
Anti Freeze is a function that performs low tempera-
ture heating operation to prevent freezing of water
lines and equipment, when air conditioning operation
iso󰀨,inregionswhereoutsidetemperaturemaydrop
below freezing.
If water lines are far from the unit or within exterior
walls, this function may not provide enough anti freeze
protection.
• HumanSensorSetting*(foradministrator):
“Human Sensor” detects the absence of a person in the
room and performs the following energy saving opera-
tion. For details of “Human Sensor”, refer to indoor unit
operation manual.
[Auto Saving]
When the absence continues for the set time, the
operation switches to energy saving operation.
[AutoO󰀨]
When the absence continues for the set time, indoor
unit operation stops.
En-13