(3) When the [OK] is touched, after a setting change screen
is displayed, the display returns to the “Weekly Timer
Setting” screen.
NOTE
To disable use of a schedule already set, touch [None] at
screen of (2).
3-5-2 ScheduleSetting
Selectthescheduletobeset
(1) Touch the [Schedule Setting] on the “Weekly Timer Set-
ting” screen.
(2) “Schedule Setting” screen is displayed. When the
[Schedule 1] or [Schedule 2] is touched, each setting
screen is displayed.
(1) (2)
Back
Enable Schedule [Schedule 1]
[None]
[None]
Schedule Setting
Day Off Setting
Weekly Timer Setting Schedule Setting
Schedule
None]
Schedule
None]
Back
Selectthedayoftheweek
(3) Select by touching the day of the week on which sched-
ule operation is to be performed. The settings for 4
times is displayed on this screen. When the contents
areveried,switchthepagebytouchingthe[NextPage]
or [Previous Page].
(4) When the schedule display area is touched, the display
switches to the setting screen of each day of the week.
(3) (4)
1
2
3
4
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
Back
Next
Page
Timer Clear
Copy
Schedule1 Setting
Fri 10:00AM
Mon Wed ThuFri SatTueSun
1
2
3
4
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
––
:
–– –– –– ––
°c
Back
Next
Page
Timer Clear
Copy
Schedule1 Setting
Fri 10:00AM
Wed ThuFri SatTueMonSun
Setthescheduleforeachdayoftheweek
(5) The setting screen for each
day of the week has 3 pages
which are switched by touching
the [Next Page] or [Previous
Page]. Setting of up to 3 times
can be displayed on 1 page.
1
2
3
––
––
––
:
––
–– ––
––
.
–
°c
––
––
.
–
°c
––
.
–
°c
––
:
––
––
:
––
––
Monday
Page 1/ 3
Cancel
OK
Next
Page
By touching each time from [1] to [8], detailed settings
for that time can be set.
(6) The items that can be set for one time are the [Op.
Time],[On/O],[Mode],and[Set.Temp].Wheneach
item is touched, each setting screen is displayed. To
clear the setting of the selected time touch [Clear].
Whenthe[Clear]istouched,avericationscreenis
displayed. When the [Yes] is touched on the screen, the
setting is cleared.
(7) Touch the [Op. Time] on the screen of (6), and adjust the
time with [
] or [ ].
(6) (7)
Cancel
Monday 01
Op. Time
Mode
––
––:––
Set Temp.
On/Off
––
Clea
K
––.–°c
Fri 10:00AM
Op. Time
Cance
K
hour
AM
8
min.
40
When the [OK] is touched, the display returns to the
screen of (6).
NOTE
Setting screen format corresponds to the preference
of the “Display format Setting”.
(8) Touchthe[On/O]onthe
screen of (6), and select the
[On],[O]or[Hold].
On/Off
Cancel OK
Off
Hold
On
When the [OK] is touched, the display returns to the
screen of (6).
NOTE
When the [Hold] is selected, the state of the indoor
unit immediately before timer operation is held.
WhenOn/Ooperationandsettingwerechanged
manually before timer operation, the new operation
and settings are held.
(9) Touch the [Mode] on the screen of (6), and select the
operation mode.
When the [OK] is touched, the display returns to the
screen of (6).
(10) Touch the [Set. Temp] on the screen of (6), and adjust
the room temperature with [
] or [ ].
When the [OK] is touched, the display returns to the
screen of (6).
(9) (10)
Mode
Cancel
Dry Heat
Hold
FanAuto
OK
Cool
26.0
°C
Set Temp.
Cancel OK
Hold
If you set the operation mode
to [Custom Auto] or [Hold],
set the cooling and heating
temperature.
20.0
28.0
°C°C
Set Temp.
Cancel OK
HeatCool
Hold Hold
<Exampleprogram>
Time On/O Mode Temp.
Morning
[1] 08:00AM On Dry 28 °C
[2] 10:00AM Hold Cool 26 °C
Afternoon
[3] 12:00PM Hold Hold 24 °C
[4] 3:00PM O – –
Night
[5] 5:00PM On Hold Hold
[6] 7:00PM Hold Hold 26 °C
[7] 9:00PM O – –
– [8] – – – –
Endthesettingofeachdayoftheweek
(11) When the [OK] on the screen
of (6) is touched, the display
returns to the screen of (5).
When continuing setting of the
same day of the week, repeat
(5) to (11).
Cancel
Monday 01
Op. Time
Mode
Dry
08:00
AM
Set Temp.
On/Off
On
Clea
K
28.0°c
When the [OK] on the screen
of (5) is touched, the display
returns to the screen of (3).
1
2
3
––
––
Monday
Page 1/ 3
Cancel
OK
Next
Page
08:00
AM On
Dry
28.0°c
Cool
26.0°c
24.0°c
10:00
AM
PM
12:00
––
En-12