Funktion-one F81 - Thank You; Receiving and Unpacking

To Next Page

To Previous Page

1 Thank you

Thank you for purchasing a Funktion One F81 system.

All Funktion One loudspeaker systems are designed and built in England. Our design philosophy is to

achieve outstanding sonic accuracy and efficiency through innovative acoustical design rather than

relying on headroom-robbing equalisation. This approach provides an audible sense of immediacy and

involvement reminiscent of the finest musical instruments.

We know that you’ll be eager to install your F81 system and get it up and running immediately, but

reading this user guide will help you to achieve the best performance - just as Funktion One intended.

2 Receiving and unpacking

Please check that your shipment is complete and in good condition before signing for the delivery.

 Palletised and wrapped/strapped multiple cartons should only be moved using a fork-lift truck

driven by a qualified forklift driver

 Single cartons should be manually handled one at a time

All Funktion One products are tested and inspected thoroughly before being despatched.

Contents

Each F81 carton should contain:

 1 x F81 complete with:

 2 x M6 blanking screws fitted to the side yoke bushes

 2 x M6 blanking screws fitted to the rear mounting bushes

 If Phoenix option has been specified - 1 x 2-pin Phoenix plug (usually fitted plugged onto

rear connector)

 1 x printed Quick Start guide

Unpacking and inspecting

Inspect your shipment packaging and its contents for any signs of abuse or transit damage as soon as you

receive it.

Caution

Although F81 systems are not particularly heavy, please be aware that the combination of smooth

enclosure finishes and concentrated driver masses can make even small loudspeakers surprisingly easy

to drop. Always unpack your systems on a softly covered work-top or on a carpeted floor to avoid

accidental damage.