42
|
43
Problem Cause Remedy
iPod
TM
cannot be connected
to the EGO system
Incorrect connection of the components
Disconnect system from the mains power supply and check
connection, remedy any connection faults
EGO iDapter was not completely initialized Shut down and restart system
EGO iDapter cable not completely connected Reconnect cable to iPod
TM
System no longer reacts to
operation
Simultaneously press the green button and the „up“ button for longer
than 2 seconds. After a short wait time, the EGO FLASH initializes
itself again
To Next Page
Loading...
Need help?
General
