→ Mutedelay
Here, you can set the waiting time between the activation of the mute line and the voice recognition. This is logical, as car radios
require various amounts of time to recognize a mute signal and the switchover of the audio channels in the radio. The time
should be set so that the first announcement of the EGO „Main menu“ can be completely heard.
Possible statuses: 0.5 sec. / 1.0 sec. / 1.5 sec. / 2.0 sec. / 2.5 sec. / 3.0 sec.
→ Reset
Resets all audio settings to the default values.
Switch off
The current Bluetooth
®
connection is severed under this item and the EGO FLASH is switched off. The EGO FLASH may be switched
back on by pressing a single key.
7.5.3 iPod
TM
Player
Symbol:
The iPod
TM
player is activated via the main menu. The activation can only be performed if the accessory device „EGO iDapter“ was
also purchased. The iPod
TM
player can also be activated if a mobile phone is not paired with the EGO Flash. To be able to play back
music from the iPod
TM
an iPod
TM
must be connected to the EGO iDapter cable.
Connection/pairing
The connection with the iPod
TM
is automatically performed after the connection to the EGO iDapter cable. If the iPod
TM
icon in the
main menu remains grayed out, the connection has failed and then you must reconnect the connector of the EGO iDapter cable to
the iPod
TM
. After establishing a connection, music can immediately be played back from the iPod
TM
. If the music is stopped, you can
search in the track lists under Options.
Charging the iPod
TM
The iPod
TM
is charged via the EGO iDapter. The iPod
TM
charging can be manually switched off under Options in the „Settings“ menu
item in the iPod
TM
player.
Playing
The following functions are available for playing and are shown in the display:
→ Play
→ Pause
→ Stop
EGO FLASH
To Next Page
Loading...
Need help?
General
