1. MOUNTING
1-14
1.5 How to Install the PR-240 Power Supply (option)
When selecting a mounting location for the unit, keep the following in mind:
• Keep the unit away from areas subject to water splash.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• A magnetic compass will be affected if the unit is placed too close to it. Observe the
following compass safe distances to prevent disturbance to the magnetic compass:
Fix the unit with four self-tapping screws (416) to a desktop or the deck as shown in
the figure below. It is not necessary to open the cover.
Standard compass: 0.90 meters
Steering compass: 0.60 meters
To Next Page
Loading...
