3. SETTINGS AND ADJUSTMENTS
3-8
3.5.1 How to set port priority
1. Access the [INITIAL SET] menu, following the procedure outlined in "How to ac-
cess the [INITIAL SET] menu" on page 3-1.
2. Select [PORT PRIORITY], then press the ENT/ACK key.
3. Select the sensor whose priority you want to adjust, then press
the ENT/ACK key. The [SENSOR PORT] pop up window is dis-
played.
4. Select the appropriate port, then press the ENT/ACK key.
5. Repeat step 3 to step 4 for other port priorities.
6. Press the MENU/ESC key to return to the [INITAL SET] menu.
PORT PRIORITY
PRIORITY
1st
LL/COG/COG
SENSOR1
HDG ROT
2nd SENSOR2
3rd SENSOR3
4th COM4
COM5
COM6
SENSOR3
SENSOR1
SENSOR2
COM6
COM4
COM5
SENSOR3
SENSOR1
SENSOR2
COM6
COM4
COM5
5th
6th
LAN LAN LAN7th
: SELECT: CURSOR
ENT
: BACK
ENT
Selected item is
highlighted in
reverse video.
SENSOR PORT
SENSOR1
SENSOR2
SENSOR3
COM4
COM5
COM6
LAN
To Next Page
Loading...
