AP-2
APPENDIX 2 DIGITAL INTERFACE
IEC61162-1/2 data sentences
IEC61162-1/2 format data is input or output from the data port COM1-COM6.
The table below shows the input/output data specifications for the transponder unit (FA-1701).
Priority for input data/sentences
Digital Interface (IEC 61162-1 Edition 4, IEC 61162-2)
Sentence data
Input sentences
ABM, ACA, ACK, ACM, ACN, AIQ, AIR, BBM, DTM, EPV, GBS, GGA, GLL, GNS, HBT, HDT,
LRF, LRI, OSD, PIWWIVD, PIWWSPW, PIWWSSD, PIWWVSD, RMC, ROT, SPW, SSD, THS,
VBW, VSD, VTG
Output sentences
ABK, ACA, ACS, ALC, ALF, ALR, ARC, EPV, HBT, LRI, LRF, LR1, LR2, LR3, NAK, SSD, TRL,
TXT, PIWWIVD, PIWWSPR, PIWWSSD, PIWWVSD, VDM, VDO, VER, VSD
Port Menu setting Input/Output Data format Speed
COM1 to
COM3
EXT DISPLAY Input/output IEC61162-2 38400bps
LONG RANGE Input/output IEC61162-2 38400bps
BEACON Input RTCM SC104 4800bps
COM4 to
COM6
EXT DISPLAY Input/output IEC61162-2 38400bps
LONG RANGE Input/output IEC61162-2 38400bps
SENSOR Input IEC61162-2 38400bps
BEACON Input RTCM SC104 4800bps
SENSOR1 to
SENSOR3
SENSOR Input IEC61162-1 4800bps
Sentence (Priority) Contents
GNS>GLL>GGA>RMC Position
VBW>RMC>VTG>OSD Speed over ground
RMC>VTG>OSD Course over ground
THS>HDT>OSD Heading
ROT> Calculated value Rate of turn
To Next Page
Loading...
