Furuno FCR-2107 series - Radar Operation

8
Loading S57 chart from CD-ROM
1. Set CD-ROM to drive, spin the scrollwheel to show
Menu/Info/Chart Menu in the guidance box and then
right-click.
ECDIS
[ Load and Update Charts ]
Go back
from CDROM
Manual
4. Click the Load button to start loading.
1) Before loading starts the message below appears.
2) Click the Yes button to load chart. SENC conversion
is done automatically and the SENC Convert window
appears.
3) After the conversion is completed, the window shown
below appears.
4) Click the Close button to finish.
2. Select "Load and Update Charts" from the menu and
"from CDROM" from the sub menu.
The system loads publisher notes and product list from
the CDROM and the "Load or Update Charts from
CDROM dialog box appears.
3. Select the chart to load from the "Load or Update Charts
from CDROM" dialog box.
+
NM
°
SINGLE