Furuno FCR-2107 series - Display until and Approve until Dates; Manual Chart Updates

9
Display until and approve until dates
Manual chart update
Do the procedures below to manually add objects (points,
lines, areas, etc.) to electronic charts, to keep them up to
date.
Inscribing new symbol
1. Spin the scrollwheel to show Menu/Info/Chart menu in the
guidance box.
2. Push the right button.
3. Select Manual Updates and push the scrollwheel. Select
Planning and push the scrollwheel.
4. Click the New button.
5. Select Drawing type
and Category.
9. Click the Edit Position
button.
10. Use the arrow and left
button to place and
input symbol. Click the
Accept button.
11. Click the Accept
button.
12. Click the "Accept
Manual Updates as
Permanent" button.
8. Click the Edit
Properties button.
7. Click the Accept New
Object button.
6. Select symbol from
symbol list box.
1. Open the Chart menu.
2. Choose Set Chart viewing dates from the menu.
3. Set the arrow in the Display Until field (Approve Until
field), use the scrollwheel to set desired date, and
push the scrollwheel.