Need help?Do you have a question about the Furuno FCR-2829 and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | FCR-2829 |
| Category | Marine Equipment |
| Language | English |
Information regarding required sensor interconnections and potential network connections.
Instructions for entering own ship speed, including automatic, manual, and echo-referenced methods.
Guide to entering heading data, either manually or automatically.
Procedure for marking the position of a man overboard (MOB) on the display screen.
Procedure for transmitting radar pulses after warm-up and switching between standby and transmit states.
Instructions for adjusting the radar receiver tuning automatically or manually.
Guide to adjusting radar receiver sensitivity (GAIN) for optimal picture clarity.
Methods to reduce sea clutter using automatic or manual A/C SEA control.
Techniques for reducing rain clutter using automatic or manual A/C RAIN control.
Guide to assigning function keys to provide optimum radar settings for specific situations.
Instructions for selecting the radar range scale and range rings.
Methods for measuring target range using range rings, cursor, or VRM.
Procedure for measuring target bearing using Electronic Bearing Lines (EBLs).
Functionality for measuring range and bearing between targets to assess collision risk.
Procedure for measuring range and bearing between multiple targets using EBL and VRM.
Procedure to adjust relative brilliance levels of screen markers and alphanumeric readouts.
Instructions on enabling and operating the dual radar display for FCR-2xx9 radars.
Explanation of the performance monitor for checking radar transmitter power and receiver sensitivity.
Procedure for setting the anchor watch to monitor ship's drift.
Information on the alert box, alert list, and how to manage alerts.
Explanation of functions related to chart radar mode, including switching and object visibility.
Introduction to Target Tracking (TT) functionality and its compliance with IMO standards.
Instructions for entering own ship's speed data for TT, including echo-referenced input.
Explanation of automatic target acquisition and how to enable it.
Guide to manually acquiring and tracking targets, including setting acquisition conditions.
Procedure for canceling tracking on individual or all targets.
Instructions on how to display detailed data for individual tracked targets.
Explanation of TT CPA/TCPA alarm functionality and how to set limits.
Guide to enabling/disabling the TT lost target alert and setting the lost target filter.
Explanation of the trial maneuver feature for simulating own ship movements and assessing collision risk.
Procedure for simulating collision risk using TT test and trial maneuver.
List of situations that trigger TT alerts, including messages, priority, and category.
Procedure to deactivate the AIS function, including sleeping all AIS targets.
Guide to filtering unnecessary AIS targets from the display using the DISP FILTER menu.
Procedure for activating sleeping AIS targets to active targets, including automatic activation.
Guide to displaying basic and expanded AIS target data.
Explanation of AIS CPA/TCPA alarm and how to set the ranges.
Information on AIS lost target declaration and how to enable/disable the alarm.
Explanation of the association function to avoid duplicate target symbols.
Instructions on creating, transmitting, and displaying AIS messages.
Procedure to show or hide the radar map display using the MAP ON/OFF button.
Instructions for inscribing marks and lines in the radar mode.
Procedures for erasing individual marks, lines, or all marks/lines within an area or map file.
Instructions for copying marks and lines between radar map files.
Procedure to export radar maps to a USB flash memory.
Instructions for importing radar maps created on other equipment via USB flash memory.
Procedure for selecting the display mode (RADAR, CHART for RADAR, CONNING).
Guide to selecting chart operating modes: Voyage navigation, Chart maintenance, and Voyage planning.
Instructions for changing the chart scale using selection buttons or scrollwheel.
Guide to selecting the presentation mode based on the chart operating mode.
Guide to controlling routes and user charts in Voyage navigation and planning modes.
Procedure for installing public keys to authenticate ENC chart materials.
Instructions for installing ENC licenses and charts in the correct order.
Instructions for synchronizing chart data and installing C-MAP databases.
Guide to installing C-MAP DL charts, including eToken registration and update file application.
Guide to backing up and restoring ENC, ARCS, and AVCS licenses to USB flash memory.
Guide to displaying the chart catalog, filtering and viewing chart cell information.
Procedure for manually updating ENC and C-MAP charts, including inserting symbols.
Guide to synchronizing chart data between multiple units.
Guide to controlling visibility of chart features via the Chart Display menu.
Instructions on controlling the visibility of symbols and features via the Symbol Display menu.
Procedure for cursor-picking objects to find detailed information.
Procedure for registering the system with C-MAP using the eToken for licenses.
Troubleshooting common problems with C-MAP software and chart installation.
Information on displaying C-MAP charts, including chart legend and multi-chart display.
Procedure for setting safety contours and defining routes for chart alert calculation.
Instructions on activating own ship predicted movement area check for chart alerts.
Explanation of how the system calculates chart alerts based on user-defined channel limits for routes.
Definition of a route plan and its main functions, including waypoints and channel limits.
Step-by-step guide to creating a new route, including waypoints and parameters.
Instructions for editing waypoints, routes, and other route data.
Explanation of the SAR feature for search and rescue operations for Man Overboard (MOB).
Explanation of available route optimization strategies (max speed, time table, max profit, min cost).
Instructions for importing route data from different equipment and formats.
Procedure for exporting route data to share with other units.
Explanation of the route transfer feature for sending and receiving route data over LAN.
Step-by-step guide to creating user charts, including adding objects like points, lines, and areas.
Instructions for editing user chart object locations, names, and properties.
Explanation of the instant track feature for returning to or deviating from a monitored route.
Overview of UKC calculation and how to set UKC limits and alarms.
Procedure for fine-tuning ship's position using radar echo target and chart material.
Comprehensive list of possible radar alerts, including priority, category, and escalation.
Regular maintenance schedule and procedures for optimal performance and longevity.
Instructions for replacing fuses in various units to protect against overvoltage.
Table of common faults and their remedies for restoring normal operation.
To Next Page
