10. C-MAP CHARTS
10-4
10.7 Permanent Warnings
Permanent warnings help you keep the C-MAP up-to-date and these are shown at the
bottom of the screen. Permanent warnings appear if the system detects a condition
that may cause a chart to be not up-to-date.
Message Meaning, Remedy
C-MAP: Database not up to date Database is not up to date. Update the data base.
C-MAP: Dynamic license reporting over-
due
The time for the “Next Report Date” has passed. This
occurs once every 12 hours if the condition continues.
Get into the Chart maintenance mode then click the
[License] button. Click the [C-MAP] tab then the [Order
Update File] button.
C-MAP: Dynamic licensing credit limit You have exceeded the allotted credit limit. Raise
credit limit.
C-MAP: No connection to eToken eToken dongle is not connected (inside the Processor
Unit) or the eToken has not been initialized. If the don-
gle is connected, open the [License] dialog box, click
the [C-MAP] tab, then click the [C-MAP Setup] and
[OK] buttons to initialize the eToken.
C-MAP: permits have expired You have an expired permit for a chart. Remove the
chart or renew subscription for the permit.
No connection to dongle. Dongle not connected. Connect dongle.
Permit expired (SSE 25): XXXXXXXX
(Chart name replaces Xs.)
You have an expired permit for a chart. Remove the
chart or renew subscription for the permit.
To Next Page
