14
5.DSC Operation
r Set the individual ID and ID name.
• Edit the 9 digits of the appropriate distress ID by using [
CHAN-
NEL
].
-Push [
CH/WX
] or [
SCAN
] to move the cursor forward or back-
ward, respectively.
Note: 1st digit ‘0’ is fixed for a group ID. Thus an address ID
input cannot started with ‘0.’ When you input 1st digit ‘0’ and other
8 digits, the ID is automatically registered as a group ID.
t Push [
DSC/ENT
] to program and exit the condition to the
normal operation.
DD
Deleting Address ID/Group ID
q Push [
DSC/ENT
] to enter the DSC menu.
w Rotate [
CHANNEL
] to select “Set up,” push
[
DSC/ENT
].
e Rotate [
CHANNEL
] to select “Delete ID,” push
[
DSC/ENT
].
•When no address ID is programmed, the transceiver exits the
DSC menu automatically.
r Rotate [
CHANNEL
] to select the desired ID name for
deleting.
t The delete confirmation display will appear when
[
DSC/ENT
] is pushed.
• Push [
HI/LO
] to delete ID and exit the DSC Menu.
• Push [
DSC/ENT
] to cancel deleting and exit the DSC Menu.
To Next Page
Loading...
