60
13. FM-3010 CONTROLLABLE MIC
13.12 Starting a Scan
q While pushing [
H/L
], push [
CH/WX
]( ) several
times to select the channel group (USA, INT, CAN), if de-
sired.
•When the Weather alert function is in use, select the desired
weather channel with [
CH/WX
] and [
YY
]
/
[
ZZ
].
w Push [
SCAN
] to start Priority or Normal scan.
• “SCAN” appears during Normal scan.
• The priority channel readout indicates “16”, and “P” and “SCAN”
indicators appear during Priority scan.
•When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to the Set mode
setting (Channel 16 is still monitored during Priority scan).
• Push [
YY
]
/
[
ZZ
] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e
To stop the scan, push
[
SCAN
]( )
.
• “SCAN” disappears.
• Pushing [
PTT
], [
16
]( ) or [
CH/WX
] also stops the scan.
13.13 Setting Tag Channels
q While pushing [
H/L
], push [
CH/WX
]( ) several
times to select the channel group (USA, INT, CAN), if de-
sired.
w Push [
YY
]
/
[
ZZ
] to select the desired channel to set as a tag
channel.
e Push [
SCAN
]( ) for 1 sec. to set the displayed channel
as a tag channel.
• “ ” appears.
r To cancel the tag channel setting, push [
SCAN
]( ) for
1 sec.
• “ ” disappears.
Convenient: Clearing (setting) all tagged channels
➥ While pushing [
H/L
], push [
SCAN
]
()for 3 sec. (until a
long beep changes to 2 short beeps) to clear all tag
channels setting in the channel group.
• After cleared all tag channels, same way to set all tag channels.
TAG
TAG
TAG
U/I/C
DW
9
TAG
U/I/C
DW
To Next Page
Loading...
