Furuno FM-3000 - Page 43

34
5.DSC Operation
5.9.4 MMSI code check
The programmed 9-digit MMSI (DSC self ID) code can be
checked in DSC Set mode.
q Push [
DSC/ENT
] to enter the DSC menu.
w Rotate [
CHANNEL
] to select “Set up,” push
[
DSC/ENT
].
e Rotate [
CHANNEL
] to select “MMSI Check,” push
[
DSC/ENT
].
r Check the 9-digit MMSI (DSC self ID) code.
t Push [
DSC/ENT
] to exit the DSC menu.
MMSI Check
123456789
Setup
DeleteID
OffsetTime
˘MMSICheck
SelItem
RCVCalls
DTRSSet
˘Setup