40
7.Set Mode
7.2.9 Attenuation level
This item sets the receive attenuation level for the Attenuator
function from 3 levels.
7.2.10 Scrambler code
(Appears only when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler
code can be set depending on dealer setting.
When the FM-3030 is installed, 32 codes (1 to 32) can be se-
lected.
7.2.11 Automatic acknowledgement
This item sets the Automatic acknowledgement function ON
or OFF.
When Position Request or Position Report call is received,
transceiver automatically transmits Position Reply or Position
Report Reply, respectively.
To Next Page
Loading...
