3. DIGITAL SELECTIVE CALLING
3-9
3.5.3 How to select the Individual call acknowledge method
The radio can be setup to transmit a reply automatically (default setting) or set so the
radio does not reply to an Individual call.
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [DSC Setup] menu then
press the [SELECT] soft key.
3. Select [Individual Ack] with the CH knob then press the
[SELECT] soft key.
4. Rotate the CH knob to select [Able to Comply] or [Un-
able] then press the [ENT] soft key to save the selected setting.
5. Press the [QUIT] soft key several times to return to radio operation.
3.5.4 Individual/Group call ringer
When an Individual call or Group call is received, the radio produces a ringing sound
for two minutes (default setting). You can select the Individual call ringer time and turn
the ringer on or off as desired.
How to set the individual/Group call ringer time
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [DSC Setup] menu then
press the [SELECT] soft key.
3. Select [Individual Ring] with the CH knob then press
the [SELECT] soft key.
4. Rotate the CH knob to select a ringing time then press
the [ENT] soft key to save the setting.
5. Press the [QUIT] soft key several times to return to radio operation.
How to turn the ringer off
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [DSC Setup] menu then
press the [SELECT] soft key.
3. Select [DSC Beep] with the CH knob then press the
[SELECT] soft key.
4. Rotate the CH knob to select [Individual] if you wish to
disable the Individual call ringer, or [Group] if you wish to disable the Group call
ringer.
5. Press the [ENT] soft key
6. Rotate the CH knob to select [Off] then press the [ENT] soft key to save the set-
ting.
7. Press the [QUIT] soft key several times to return to radio operation.
To turn the ringer on, select [On] at step 6 in the procedure.
To Next Page
Loading...
