Furuno GP-1670 - ALARMS; 7.1 ALARMS Menu

7-1
7. ALARMS
The plotter section has 11 alarms that release audiovisual alarms when the specified
conditions are met. These are
When an alarm condition is met, the audio alarm sounds, a relevant alarm pop-up
appears and the applicable alarm icon appears and flashes at the upper left-hand po-
sition. (See the Appendix for a list of the alarm icons.) You may silence the audio alarm
by pressing the ESC/MENU key. An alarm icon remains on the screen until the corre-
sponding alarm is deactivated or the reason for the alarm is gone.
7.1 ALARMS Menu
The [ALARMS] menu is where you set the conditions for the alarms.
• Anchor alarm
• Arrival alarm
• Black water tank alarm
• Depth alarm
• Fuel tank alarm
• Shear alarm
• Speed alarm
• Temperature alarm
• Trip alarm
• Water tank alarm
• XTE alarm
Scroll
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off